KP2925-60 - Lincoln KP2925-60 Magnum PRO 300 Gun Tube 60 Degree

Get Back to Welding with the Right Reach

If your MIG gun has taken a beating or you are just looking to refresh your equipment, the Lincoln Electric KP2925-60 Magnum PRO Gooseneck is the part you need. Designed specifically for the Magnum PRO 300 (and compatible with the 200 series), this 60-degree gun tube is the standard workhorse for general fabrication. We all know that the gooseneck is the part of the gun that takes the most heat and abuse—it gets banged against fixtures, spattered with molten metal, and subjected to extreme thermal cycles. When it's time to replace it, don't settle for a knock-off that might not fit your handle or consumables correctly.

The 60-degree angle on this tube is the industry standard for a reason: it provides a natural hand position for flat and horizontal welds while still giving you enough clearance to get into corners. It’s rated for 300 amps, meaning it can handle the heat of heavy wire welding without overheating or degrading prematurely. Installing the KP2925-60 is straightforward, letting you swap out a damaged neck and get back under the hood in minutes. A fresh gooseneck also ensures that your liner feeds wire smoothly through the bend, reducing bird-nesting and erratic feeding issues that can ruin a good bead.

This assembly is built tough. The outer insulation is resistant to cuts and abrasion, while the inner conductor is designed for maximum current flow. It fits perfectly into your existing Magnum PRO handle, so you won't be fighting with loose connections or gas leaks. Whether you are working in a production line, a repair shop, or a garage, keeping your torch in top condition is key to producing quality welds. With the KP2925-60, you ensure your Lincoln gun performs exactly like it did the day you bought it.

Don't let a bent or clogged gun tube slow you down. This genuine Lincoln part ensures your gas flow remains laminar and your electrical contact remains solid. It accepts all standard Magnum PRO front-end consumables, so you can keep using the tips and nozzles you already have in stock.