KP2454-1 - Lincoln Electric KP2454-1 MIG Gun Gooseneck Assembly 62 Degree

Get Back to Welding

Is your MIG gun sputtering or feeding wire poorly? The problem might be in the neck. The Lincoln Electric KP2454-1 Gun Tube Assembly is the direct replacement you need to get your torch running smoothly again. Over time, gun tubes (or goosenecks) can get bent, clogged with spatter, or damaged from heat, leading to frustrating wire feed issues and bad arcs. Swapping out your old tube for this brand-new, genuine Lincoln part is a quick fix that can make your gun feel like new.

This specific model features a 62-degree bend, which is a comfortable angle for most general welding positions, helping you keep your wrist in a neutral position while accessing the weld joint. At 7.5 inches long, it gives you enough clearance to see your puddle without being so long that it becomes unwieldy. Because it's a genuine Lincoln Electric part, you don't have to worry about it not fitting or leaking gas. It's built tough to handle the heat of daily welding.

Why Replace Your Gun Tube?

Many welders struggle with erratic arcs or "stuttering" wire, blaming the liner or the machine, when the culprit is often a kinked or worn-out gun tube. Inside the tube, the surface needs to be smooth to guide the wire to the contact tip. If you've dropped your gun or if it's seen years of heavy use, the internal geometry might be compromised. Installing the KP2454-1 ensures a straight, clean path for your wire and a tight seal for your gas, resulting in better welds and less frustration.