LMD2A-10 - Miller LMD2A-10 AccuLock MDX Liner .030-.035 10ft

Flawless Feeding with Miller AccuLock MDX

If you have ever struggled with bird-nesting, burnbacks, or the frustration of cutting a liner just a fraction of an inch too short, the Miller LMD2A-10 AccuLock MDX liner is the upgrade you have been waiting for. Designed for the MDX-100 and MDX-250 MIG guns, this 10-foot liner takes the guesswork out of maintenance. The days of measuring your liner against the old one or using a tape measure are over.

Error-Proof Installation: The genius of the AccuLock system is in how it installs. You simply load the liner from the front of the gun and lock it into place. Then, you go to the back of the machine and trim the excess flush with the power pin cap. It is impossible to cut it too short or too long because the gun itself acts as the measuring tool. This perfect fit ensures your wire has a straight, supported path all the way to the contact tip.

Smoother Welds: Beyond easy installation, this liner is built for performance. It features Miller's E-Z Feed coating, which allows the wire to glide through the cable with minimal resistance. This is a game-changer when running .030" or .035" wire, especially if you are working with stainless steel. By reducing drag, the liner prevents the wire from buckling inside the gun, giving you a consistent, stable arc and letting you focus on laying down the perfect bead rather than fighting your equipment.