44-116-15 - Tweco Style 44-116-15 MIG Liner 15ft for 1/16 Wire

Smooth Wire Delivery for Consistent Welds

Every welder knows that a bad liner can ruin a good day. If your wire is stuttering, dragging, or burning back, it might be time to swap out your conduit. The Tweco Style 44-116-15 MIG Gun Liner is built to get your setup running smoothly again. Designed as a direct fit for some of the most popular guns in the industry—including the classic Tweco #3 and #4, as well as the Spray Master and Eliminator series—this liner is the tune-up your MIG gun needs.

Built for the Grind

When you are pushing 1/16-inch wire, you need a liner that can handle the friction and the weight. This liner features a zinc-plated steel wound construction. Why does that matter? The zinc plating acts like a lubricant, letting the wire glide through the 15-foot cable with minimal resistance. It also fights off rust and corrosion, which is a huge plus if your equipment sits in a shop with fluctuating humidity. A smooth liner means a stable arc, less spatter, and less frustration at the contact tip.

Easy Installation and Fit

Replacing a liner shouldn't be a wrestling match. This 44 Series liner comes with a machined brass stop that seats perfectly into the back of your gun, ensuring you don't have gas leaks or loose connections. The stop is also stamped with the part number, so you never have to guess if you grabbed the right one from the supply cabinet. Whether you are running a Spray Master MS450 or an Eliminator EL350, this liner drops right in, ready to work.

Maintenance Tips

To get the most out of your new liner, make sure to lay your gun cable out straight when installing it. Trim the front end precisely according to your gun manufacturer's instructions to ensure the correct stick-out at the diffuser. Regular maintenance of your liner—blowing it out with compressed air during wire changes—can extend its life, but when it's time to replace, this Tweco Style 44-116-15 offers the performance you need without breaking the bank.