Skip to Main Content
Canadian
Canadian owned and operated

12401422 - Tweco 24CT-62F Flush MIG Nozzle 5/8 Bore (2-Pack)

Packaging: pack of 2
$40.17/EA $57.38/pack of 2 only $28.69/EASave 29%

Usually ships within 3-5 business days

OVERVIEW

High-Performance Tweco 24CT-62F Nozzles

Optimize your MIG welding setup with the Tweco 24CT-62F Standard Nozzle, supplied in a convenient pack of two. Designed for the demanding professional, this nozzle fits Tweco Spray Master (250, 350, 450) and Tweco Professional (No. 2, 3, 4) series MIG guns. The 24CT-62F is characterized by its 5/8-inch (15.9 mm) bore orifice, which provides optimal gas coverage for short-circuit, globular, and spray transfer modes. This bore size is large enough to ensure a laminar gas flow that effectively shields the molten puddle, yet compact enough to maneuver into standard joints.

The "Flush" designation indicates the contact tip's position relative to the nozzle exit. A flush nozzle is often preferred for applications where visibility is critical, as it allows the welder to see the arc and the wire stick-out clearly. It also helps in maintaining a consistent contact-tip-to-work distance (CTWD). Unlike recessed nozzles, which can sometimes accumulate spatter inside the cup that bridges to the tip, the flush design is easier to inspect and clean. The nozzle utilizes a 3-piece design system involving the nozzle, a nozzle insulator (often built-in or separate depending on the gun generation), and the gas diffuser.

A standout feature of the 24CT series is the coarse thread attachment. In high-heat applications, fine threads can easily become clogged with micro-spatter or seize due to thermal expansion. Tweco's coarse thread geometry mitigates this risk, ensuring that the nozzle can always be unscrewed easily, even after a long shift of high-amperage welding. This nozzle is typically used with the 54A gas diffuser and standard 14-series contact tips. By choosing genuine Tweco consumables, you ensure precise fitment and consistent electrical insulation, reducing the risk of arc wandering or gas turbulence.

Technical Specifications:

  • Bore: 0.625" (5/8")
  • Connection: Coarse Thread
  • Material: Copper Alloy
  • Compatibility: Tweco #2, #3, #4 Guns
Additional Information
Brand:Tweco
Item:Nozzle
Packaging Description:pack of 2
Fits Which Model:N/A
Bore Size:5/8" (15.9 mm)
Nozzle Style:Flush Tip
Thread Type:Coarse Thread
Series:24 Series
Material:Copper Alloy
Compatible Diffuser:54A

INCLUDED

  • 2 x Tweco 24CT-62F MIG Nozzles

APPLICATIONS

  • General Fabrication
  • Structural Steel Welding
  • Automotive Repair
  • Heavy Equipment Manufacturing
  • Shipbuilding
  • Farm and Ranch Welding

FAQ

CT stands for 'Coarse Thread'. This thread design allows for quicker installation and removal compared to fine threads and is less likely to seize due to heat or spatter.

The bore size is 5/8 inch (0.625 inches or approximately 15.9 mm), which is a standard size for general-purpose MIG welding.

The 'F' in the part number indicates a Flush relationship. When installed correctly, the contact tip will be flush with the end of the nozzle.

These nozzles are compatible with Tweco Spray Master series (MS250, MS350, MS450) and Tweco Professional series (No. 2, 3, and 4) MIG guns.

This product is a package of 2 nozzles.

The 24CT-62F nozzle is typically used with the Tweco 54A gas diffuser.

It is made from a heavy-duty copper alloy designed to withstand high heat and resist spatter adhesion.