110795 - Miller 110795 Replacement MIG Gun Gooseneck

Restore Your MIG Gun Performance with the Miller 110795

Keep your Miller welding operations running smoothly with the Miller 110795 Head Tube. For professional welders, the "gooseneck" of the MIG gun is one of the most abused parts of the torch. It takes the heat from the arc, gets banged against workpieces to knock off spatter, and is often used to manipulate parts into place. Eventually, this wear and tear can degrade the tube's internal surface or bend the neck out of spec, causing friction on the wire liner. If you are experiencing inconsistent wire feeding, "stuttering" at the arc, or notice that your gun is running hotter than usual, it might be time to replace the head tube.

The Miller 110795 is the direct replacement for specific Miller MIG and Spoolmatic guns. Swapping out a damaged head tube is a quick maintenance task that can solve a host of welding problems. A fresh tube ensures that the wire liner has a smooth path, reducing drag on the drive rolls and preventing birdnesting. Furthermore, a new head tube ensures that the gas diffuser and nozzle thread on securely, preventing gas leaks that can suck oxygen into your weld and cause porosity.

Troubleshooting Tip: If you find yourself constantly burning back contact tips or if the wire seems to drag despite a new liner, inspect your head tube. A slight kink or internal buildup of micro-arcing debris inside the tube can ruin the feedability of even the best welding wire. Replacing the 110795 tube restores the mechanical integrity of the gun's front end.

This package contains one (1) Miller 110795 Tube, Head. It is ready to install right out of the box. Simply disconnect your old tube, transfer any necessary insulators or shock washers, and thread the new one in. Always ensure your machine is powered down before performing maintenance on the gun. By sticking with Miller OEM parts, you ensure that your gun remains balanced, comfortable, and capable of handling the amperage it was rated for.

Application Notes:

• Check your gun's parts breakdown to confirm part number 110795.
• Inspect O-rings and insulators during installation; replace if cracked.
• Ensure the liner is trimmed to the correct length after installing the new head tube.