21264 - ESAB 21264 Pilot Arc Lead for PT-15XL/19XL - 20ft

Restore Reliable Starts with the ESAB 21264 Pilot Arc Cable

If your PT-15XL or PT-19XL plasma torch is struggling to start the arc, or if you are experiencing intermittent firing, the issue might be in your pilot arc lead. The ESAB 21264 is the direct replacement 20-foot pilot arc cable you need to get back to cutting. The pilot arc is what gets the party started—it creates the initial ionization path for the plasma. If this cable is frayed, broken internally, or has bad connections, your machine simply won't cut, no matter how good your consumables are.

This 20-foot lead gives you plenty of room to maneuver around large workpieces or across a cutting table. It is built tough, with a heavy jacket that resists cuts and burns, which is crucial when you are dragging cables across a shop floor covered in slag and sharp metal edges. Because it is an OEM part from ESAB, you don't have to worry about hacking connectors or dealing with wires that are too thin to carry the current. It plugs right in and works exactly like the original.

Replacing your pilot arc cable is often a neglected part of torch maintenance. Over time, the constant flexing and movement can break the copper strands inside the insulation, creating 'dead spots' where the torch won't fire in certain positions. Swapping out the old cable for a fresh 21264 eliminates these headaches. It ensures that when you pull the trigger or send the start signal, the torch fires instantly and cleanly.

Don't let a bad cable slow down your production. This cable is designed for the heavy hitters—the PT-15XL and PT-19XL—so you know it can handle the power. Keep your cuts clean and your starts instant with this genuine replacement lead.