0558006030 - ESAB PT-36 3.0mm Plasma Nozzle Pack

Keep Your Table Running with Genuine ESAB Parts

If you are running an ESAB table with a PT-36 torch, you know that cut quality is everything. The ESAB 0558006030 Nozzle (3.0mm / .120") is the heavy-hitter you need for thick plate work. When you are pushing high amps to blast through thick steel, your nozzle takes a beating. That is why sticking with genuine ESAB parts matters. These nozzles are built to withstand the intense heat and pressure of the plasma arc without blowing out prematurely. A worn nozzle doesn't just look bad; it causes your arc to wander, giving you beveled edges and excessive dross that you have to grind off later. Nobody wants to spend their afternoon with a grinder because they tried to stretch a nozzle too far.

This pack of 5 ensures you have backups ready to go right at the machine. There is nothing worse than blowing a tip in the middle of a nested sheet and realizing the tool crib is empty. With a 3.0mm orifice, these nozzles are designed for the heavy jobs. They allow for the massive gas flow and arc energy needed to get clean, drop-cut parts. When you install a fresh 0558006030 nozzle, you can immediately see the difference in the arc stability and the crispness of the cut face. It’s about getting the part off the table and onto the next stage of production without hassle.

Installation is straightforward, fitting perfectly into the PT-36 stack-up. Remember to check your electrode and swirl ring while you are swapping the nozzle; if the electrode is pitted, it will kill your new nozzle in seconds. These nozzles are precision-made to center the arc perfectly, protecting your torch body and ensuring you get the maximum life out of every consumable set. Whether you are cutting parts for heavy machinery, structural beams, or thick brackets, these nozzles deliver the consistency professional operators demand.