194722 - Miller 50mm Gas-Thru Dinse Adapter for Air-Cooled TIG Torches

Upgrade Your TIG Connection with the Miller 194722

If you are running a Miller Syncrowave 200 or a similar machine with a 50mm gas-through Dinse output, you know that a standard lug adapter just won't cut it. You need the Miller 194722 TIG Torch Power Adapter. This handy piece of hardware is the bridge between your trusty air-cooled TIG torch and your machine's power source. It is specifically built to handle one-piece power cables found on popular torch models like the WP-17 and WP-9 series. Instead of running a separate gas hose to the machine, this adapter allows the shielding gas to flow right through the center of the Dinse connector, keeping your leads tidy and your setup professional.

Rated for 150 Amps, this adapter is perfect for light to medium-duty TIG applications. Whether you are welding stainless steel in a fabrication shop or doing precision aluminum work in a garage, the solid connection provided by this adapter ensures stable arc starts and consistent current flow. The 50mm Dinse connector (roughly 0.5 inches in diameter at the pin) is the standard "large" Dinse size used on most industrial welders, offering a twist-lock mechanism that is both secure and easy to remove. The rubber housing is tough enough to withstand being dragged across shop floors and resists damage from hot sparks and spatter.

Installation is straightforward: simply thread your torch's power cable into the back of the adapter and tighten it down. Then, plug the Dinse end into your welder, twist to lock, and you are ready to weld. No extra gas hoses to clamp, no complex fittings to adapt. Please be aware that this part is specified by Miller to not work with CK Worldwide torches, so check your torch brand before ordering. For everyone else rocking a Weldcraft or Miller torch, this is the OEM part you need to get your arc lit and your gas flowing smoothly.