Skip to Main Content
Canadian
Canadian owned and operated

45V62 - CK Worldwide 45V62 Standard Gas Lens Body 5/32 Inch

Packaging: 1 of each
$32.60/ea $22.32/1 of each only $22.32/eaSave 32%

Usually ships within 3-5 business days

OVERVIEW

Upgrade Your Torch for Smoother, Cleaner Welds

If you are running heavy amps with 5/32" tungsten on your 17, 18, or 26 style torch, the CK Worldwide 45V62 Gas Lens Body is the upgrade you need to take your weld quality to the next level. Standard collet bodies are fine for basic work, but they often produce turbulent gas flow that can pull in atmospheric air, leading to dirty welds and porosity. The 45V62 solves this by using a built-in mesh screen to smooth out the gas flow, creating a calm, straight stream of argon that protects your puddle far better than a standard setup ever could.

One of the biggest benefits of switching to this gas lens is the ability to stick your tungsten out further. With a standard body, if you pull back too far, you lose coverage. With the 45V62, you can extend your tungsten significantly—sometimes up to an inch—and still keep the weld pool bright and shiny. This is a game-changer when you are trying to see around a corner or get into a tight fillet weld. Better visibility means better control, and better control means a better-looking bead when the hood comes up.

This part is built tough by CK Worldwide, known for making some of the best TIG gear in the business. It fits all standard air-cooled 17 and 26 torches, as well as water-cooled 18 torches. Just remember, when you switch from a standard collet body to a gas lens like this, you will need to swap your cup to a 54N series nozzle and use the correct 54N01 insulator. It’s a small change to your setup that makes a massive difference in your daily welding experience, saving you gas and grinding time in the long run.

Why Choose a Gas Lens?

  • Better Coverage: Laminar flow protects the weld pool from oxygen and nitrogen.
  • Gas Savings: More efficient coverage often allows for lower CFH settings.
  • Longer Stick-Out: Get into tight spots without losing shield gas protection.
  • Cleaner Tungsten: Reduced turbulence means less chance of atmospheric contamination on your electrode.
Additional Information
Brand:CK Worldwide
Item:Gas Lens Body
Packaging Description:1 per each
Consumable Type:Gas Lens Body
Tungsten Diameter:5/32" (4.0mm)
Torch Series:3 Series, 17 Series, 18 Series, 26 Series
Material:Brass, Stainless Steel Mesh
Compatible Cup Series:54N Series

INCLUDED

  • 1 x 45V62 Gas Lens Body (5/32" / 4.0mm)

APPLICATIONS

  • Heavy structural steel fabrication
  • Thick-section aluminum welding
  • Pipe welding (root and fill passes)
  • Aerospace and motorsports fabrication
  • Maintenance and repair operations (MRO)
  • Shipbuilding and marine applications

FAQ

The 45V62 fits 3-Series TIG torches, which includes the WP-17, WP-18, WP-26, CS300, CK150, CK210, CK300, and similar models.

This specific gas lens body is designed for 5/32" (4.0mm) tungsten electrodes.

Yes, you must use 54N series alumina nozzles (standard gas lens cups) instead of the standard 10N series cups used with regular collet bodies.

Yes, when converting from a standard collet body to a gas lens body in the 3-Series, you typically need the 54N01 insulator.

A gas lens body like the 45V62 contains a mesh screen that creates laminar gas flow, whereas a standard collet body has simple holes that create turbulent flow. Laminar flow provides better coverage and allows for longer tungsten stick-out.

No, the 45V62 is a 'Standard' gas lens body sized for 5/32" tungsten. The 'Large Diameter' gas lens for 5/32" tungsten is part number 45V63, which uses even larger cups (57N series).

Absolutely. The 5/32" size is commonly used for high-amperage AC welding on thick aluminum, and the gas lens helps maintain a clean puddle.

You should use a standard 10N25 collet (5/32" / 4.0mm) with this gas lens body.