194723 - Miller DI-26R Gas-Thru DINSE Adapter for 26 Series Torches

Connect Your TIG Torch with Confidence

If you are looking to hook up your trusty air-cooled TIG torch to a modern Miller welder, the Miller 194723 DI-26R Adapter is likely the part you need. This adapter is the bridge between your torch's power cable and the machine, ensuring you get full power and gas flow with a simple twist-lock connection. Designed specifically for 200-amp torches, like the common WP-26 series, this adapter takes the hassle out of setting up your rig.

Streamlined Setup

Gone are the days of fiddling with separate gas hoses and complex bolt-on lugs for every machine setup. This "Gas-Thru" DINSE connector routes your shielding gas directly through the center of the plug. If your welder has the gas outlet built right into the terminal (common on many Dynasty, Maxstar, and Syncrowave models), this adapter plugs right in. It creates a clean, clutter-free connection that gets you welding faster. The solid connection ensures you don't lose amperage across the joint, giving you a stable, consistent arc.

Built Miller Tough

When you are pushing 200 amps, you need a connector that can take the heat. Cheap knock-off adapters can overheat, melt, or cause arc stuttering. This genuine Miller part is built with heavy-duty brass and high-quality rubber insulation to withstand the rigors of a shop environment. It fits 1-piece power cables with the larger 7/8-inch thread found on heavy-duty air-cooled torches. Whether you are replacing a worn-out connector or setting up a new torch lead, this adapter ensures your equipment performs at its best.

Compatibility Check

Before you buy, just take a quick look at your torch's power cable. This adapter is for the larger cables usually found on 26-series torches (200 amp). It screws into the 7/8"-14 thread on your cable and plugs into the large (approx. 1/2" diameter pin) socket on your welder. It is strictly for air-cooled setups, so if you are running a water-cooler, you'll need a different block. For everyone else burning rod with a standard air-cooled rig, this is the gold standard for connection.