Canadian owned and operated
Every welder knows that a perfect weld starts with a perfect prep. If you are running a Tri Tool tube squarer or severing machine, you rely on your clamping system to hold that pipe dead steady. The Tri Tool TR-2162 V-Block is the accessory you need when you are working with 1-inch, 7/8-inch, or 13/16-inch tubing. When you are out in the field or in the fab shop, trying to square up stainless tubing for an orbital welder, any movement in the pipe means a bad cut, a gap in your fit-up, and a rejected weld. This V-Block eliminates that headache by locking your tube in place with absolute precision.
Why swap out your blocks? Because one size does not fit all. Using the correct V-Block for your specific tube diameter ensures that the machine centers itself perfectly on the pipe. This block is specifically machined to handle .875, .813, .780, and 1.000 inch ODs. It grabs the tube securely without crushing it, which is a lifesaver when you are dealing with expensive polished sanitary tubing. The hardened steel construction means it won't get chewed up after a few jobs; it is built to last through thousands of cuts.
Don't let worn-out or mismatched tooling slow down your production. If your current blocks are slipping or you are gearing up for a job with these specific pipe sizes, the TR-2162 is the right tool for the job. It installs quickly into your machine's headstock, letting you switch over sizes and get back to cutting chips in minutes. Good fit-up makes for easy welding, and good fit-up starts with this V-Block.
| Additional Information |
|---|
| Brand:Tri Tool |
| Item:Accessory |
| Packaging Description:1 Per Ea |
| Component Type:V-Block, Clamping Jaw |
| Tube OD Capacity:0.875 inch, 0.813 inch, 0.780 inch, 1.000 inch |
| Material:Hardened Steel |
| Application:Tube Severing, Tube Squaring |
