Skip to Main Content
Canadian
Canadian owned and operated

1726 - Weldcraft 1726 70-Degree Modular TIG Head 200A

Packaging: 1 per ea
$100.39/ea $65.98/1 per ea only $65.98/eaSave 34%

Usually ships within 3-5 business days

OVERVIEW

Get the Right Angle for the Job

If you are running a Weldcraft modular torch setup like the WP-225, you know the value of versatility. The Weldcraft 1726 Modular Torch Head is your go-to standard head for everyday TIG welding. With a 70-degree angle, it sits right in that sweet spot—not too straight, not too steep—giving you a comfortable wrist position for those long beads on the bench or out in the field. It’s rated for 200 Amps, so you can crank up the heat on aluminum or stainless without worrying about melting your torch head down.

Swap and Go

The beauty of the modular system is speed. Maybe you just finished a tight corner weld with a flex head or a 90-degree head, and now you need to get back to standard fabrication. Unscrew the old head, screw on the 1726, and you are ready to rock. No need to disconnect water lines or swap out the entire cable assembly. It fits the WP-150, WP-200, and the popular WP-225 bodies perfectly. Plus, it uses the standard consumables you likely already have in your kit (10N series collets and cups), so you don't need to hunt for special parts.

Built Tough for Real Welders

Weldcraft (now Miller) makes these heads to last. The copper construction handles the heat well, and the threads are solid, so they won't strip out after a few changes. Whether you are walking the cup on pipe or dabbing filler on a custom manifold, the 1726 gives you the stability and current transfer you need for a clean, consistent arc. It’s a rigid head, meaning it stays exactly where you point it, giving you precise control over your tungsten stick-out and gas coverage.

Why You Need This in Your Kit

Every welder with a modular torch needs a fresh 70-degree head in their arsenal. Over time, threads get worn, and heads take a beating from heat and spatter. Replacing your worn-out head with a genuine Weldcraft 1726 restores your torch's performance and ensures you aren't fighting a wandering arc or gas leaks. Keep your welds clean and your setup flexible with this essential modular component.

Additional Information
Brand:Weldcraft
Item:Torch Head
Head Style:Rigid
Packaging Description:1-per-ea
Amperage Rating:200 A
Torch Head Angle:70 Degrees
Torch Type:Modular TIG Torch
Cooling Method:Air Cooled, Water Cooled
Compatible Models:WP-225, WP-150, WP-200, SF-225

INCLUDED

  • 1 x Weldcraft 1726 Modular Torch Head (70 Degree)

APPLICATIONS

  • General fabrication and manufacturing
  • Aerospace component welding
  • Pipe and tube welding
  • Automotive exhaust and intake fabrication
  • Maintenance and repair operations (MRO)
  • Precision TIG welding on stainless steel and aluminum

FAQ

The 1726 head is compatible with Weldcraft modular torch bodies including the WP-225, WP-150, WP-150V, WP-200, WP-200V, and SF-225.

This head is rated for 200 Amps DC and 150 Amps AC.

No, the 1726 is the torch head only. Collets, collet bodies, and cups must be purchased separately.

It uses standard 3-Series (17, 18, 26 series) consumables.

The 1726 is a rigid head with a fixed 70-degree angle.

Yes, when paired with a water-cooled modular body like the WP-225, this head supports water-cooled operation up to its amperage limit.

Simply unscrew the existing modular head from the torch body and screw the 1726 head in place. Ensure it is hand-tight to make a good electrical connection.

The 1726 features a 70-degree angle.