43049002 - Arcair Slice Uncoated Exothermic Cutting Rods 1/4x22 (25-Pack)

Get the Job Done with Arcair Slice Uncoated Rods

When you are out in the field and faced with a seized pin, a concrete-encased rebar, or a piece of cast iron that just won't budge, standard torches often fail. That is where the Arcair Slice system comes in, and these 43049002 Uncoated Cutting Rods are the ammunition you need to blow through the toughest barriers. Designed for the professional welder and fabricator who encounters the "impossible" cuts, these rods turn your Slice torch into a universal cutting tool. Whether you are working on a bridge deck, repairing heavy earth-moving equipment, or performing demolition in a foundry, these rods cut through everything in their path.

The magic lies in the exothermic reaction. Once you spark this rod, it burns hot—hot enough to melt through slag, rust, mud, and composite materials that would instantly extinguish a standard oxy-acetylene flame. Because the rod itself provides the fuel, you don't need to maintain a ground clamp or a welding arc after ignition. This means you can cut a piece of scrap lying on a wooden pallet or pierce a hole through a concrete wall without worrying about electrical continuity. The 22-inch length gives you plenty of burn time per rod and keeps you at a safer distance from the molten spray, which is critical when piercing deep holes.

These specific rods are the "Plain" or uncoated version. While coated rods are great for drag cutting without shorting out, the uncoated rods are preferred by many operators for their slightly slimmer profile and direct burn characteristics. They are rugged, reliable, and ready for abuse. Sold in a pack of 25, this box is a must-have for any service truck or maintenance shop. Don't let a stubborn material stop your project cold; load up a Slice rod and cut it free.

Common Applications

• Heavy Equipment Repair: Removing seized pins and bushings from excavators and loaders.
• Mining & Quarrying: Cutting through rock-embedded steel and crusher liners.
• Fire & Rescue: Breaching reinforced doors or collapsing structures quickly.
• Foundries: Washing off burnt-in sand and removing risers from castings.

Equip your shop with the versatility of the Arcair Slice system. These rods are the difference between a job taking five minutes and a job taking five hours.