1424=0034 - Victor 2.5-inch Replacement Acetylene Gauge, 0-30 PSI, Brass Case

Keep Your Regulator Accurate and Safe

When you are out in the field or busy in the shop, a broken regulator gauge can shut down your entire operation. The Victor 1424-0034 is the reliable replacement you need to get your oxy-fuel rig back up and running. This isn't a cheap throw-away gauge; it features a solid brass case that stands up to the bumps and knocks of daily shop life better than painted steel alternatives.

Designed for Safety: If you are welding or cutting with Acetylene, you know the golden rule: never exceed 15 PSI. This gauge makes safety automatic with its prominent "Red Arc" display. The dial clearly shows you the safe working zone and visually flags the danger zone, so you can set your pressures with confidence at a glance. The large 2-1/2 inch face is easy to read even through a welding helmet or safety glasses.

Easy Installation: Swapping out a damaged gauge is simple. This unit uses a standard 1/4-inch NPT thread found on most medium and heavy-duty regulators. Just apply a little Teflon tape or thread sealant to the threads, screw it into the low-pressure port of your regulator, and tighten it down with a wrench on the brass stem flats. It reads both PSI and kPa, so no matter what specs your procedure calls for, you are covered.

Key Features

• Clear Readout: Large numbers and high-contrast needle.
• Safety First: Red line indicator for Acetylene limits.
• Built Tough: Brass housing resists rust and impact.
• Dual Scale: Reads 0-30 PSI and 0-200 kPa simultaneously.