Skip to Main Content
Canadian
Canadian owned and operated

1424=0526 - Victor EDGE Series Replacement Gauge 60 PSI / 400 KPA

Packaging: pack of 1
$52.26/EA $31.31/pack of 1 only $31.31/EASave 40%

Usually ships within 3-5 business days

OVERVIEW

Keep Your EDGE Regulator Reading Right

You know the drill: you're setting up for a cut, you crack the cylinder valve, and you squint at your regulator gauge only to find the lens is cracked, the needle is stuck, or it's just too clouded to read. Don't guess with your gas pressure. The Victor 1424-0526 is the direct replacement gauge for your Victor EDGE series regulator, specifically designed to get your rig back to spec. This isn't just a generic gauge; it's built to match the rugged, user-friendly design of the EDGE line that you rely on daily.

This gauge covers the 0-60 PSI range (and 0-400 KPA), which is the sweet spot for your delivery pressure on Acetylene and fuel gas setups. The 2-1/2 inch face is big and bold, meaning you can check your pressure from a few feet away without having to lean right in. That extra visibility counts when you are working in a dim shop or have your hood flipped up but are still wearing safety specs. The dual scale is handy if you're working with specs that call for KPA, but for most of us, that clear 0-60 PSI sweep is what matters for dialing in that perfect neutral flame.

Durability is key in our line of work. Regulators get banged around on carts, tossed in truck beds, and exposed to sparks and grime. This Victor gauge is built to take it. It features a tough lens and a solid internal movement that resists vibration, so the needle doesn't bounce all over the place when you're flowing gas. It fits perfectly into the EDGE regulator body, maintaining that low-profile look that prevents the gauge from getting snagged on hoses or cables.

Swapping out a gauge is one of the easiest fixes you can do to keep your gear safe and reliable. A working delivery gauge is the only way to know you aren't starving your tip or blowing molten metal all over the place with too much pressure. Grab the Victor 1424-0526, thread it in (use a backup wrench!), and get back to cutting with confidence. It’s a small part that makes a big difference in how smoothly your day goes.

Additional Information
Brand:Victor
Packaging Description:1 Per Ea
Dial Diameter:2-1/2 in
Pressure Range:0-60 PSIG, 0-400 kPa
Series:EDGE Series
Gas Service:Acetylene, Fuel Gas
Gauge Type:Low Pressure (Delivery)
Scale Type:Dual Scale

INCLUDED

  • 1x Victor 1424-0526 2-1/2" Replacement Gauge (60 PSI/400 KPA)
  • Installation Instructions

APPLICATIONS

  • Oxy-Acetylene Cutting and Welding
  • Oxy-Fuel Heating and Brazing
  • HVAC Purging and Testing
  • Industrial Metal Fabrication
  • Maintenance and Repair Operations (MRO)
  • Structural Steel Erection

FAQ

This gauge measures pressure from 0 to 60 PSI (0 to 400 KPA).

This is a low-pressure delivery gauge, typically used to indicate the pressure leaving the regulator and going to the torch.

It is designed specifically for the Victor EDGE series regulators but may fit other regulators requiring a 2-1/2" bottom mount gauge with similar specs.

While the gauge mechanism can handle inert gases, a 0-60 PSI range is typically too low for Oxygen cutting pressures (usually 0-100 or 0-150 PSI). It is standard for Acetylene or Fuel Gas delivery.

Ensure the system is depressurized. Remove the old gauge using a wrench on the brass stem (never twist the case). Apply PTFE tape or paste to the threads of the new gauge (ensure it is oxygen-safe if used on oxygen systems, though this is likely fuel) and tighten firmly.

No, thread sealant is usually not included. You should use an appropriate PTFE tape or paste approved for gas service.

EDG refers to the Victor EDGE series of regulators, which feature a distinct design that this gauge is styled to match.

Victor EDGE gauges typically use a high-impact polycarbonate (plastic) lens for durability and safety.