53F212 - E-WELD NOZZLE High-Temperature Ceramic Anti-Spatter Spray

Keep Your Nozzle Clean and Your Arc Smooth

Every welder knows the frustration of a clogged nozzle. You're in the middle of a long bead, and suddenly your gas flow gets choppy, or you start seeing porosity because a chunk of spatter has blocked your shielding gas. Usually, this means stopping, grabbing your pliers, and scraping out the gunk—or worse, banging your gun against the table to knock it loose. With Walter E-WELD NOZZLE Anti-Spatter Spray, you can say goodbye to that constant interruption. This isn't just another cheap spray that burns off the second you strike an arc; it's a heavy-duty shield designed to take the heat.

The secret is in the high-temperature formula. Standard anti-spatter sprays often fail when things get really hot, but E-WELD NOZZLE is rated to withstand up to 1000° C. Whether you are running hot MIG spray transfer, flux-core, or using a plasma cutter, this spray creates a slick barrier that spatter just can't stick to. A single thin coat can last you an entire 8-hour shift. That means you spray it on in the morning, and your nozzle stays clean all day long. No more stopping every 20 minutes to clean out the tip. The spray comes out orange, so you can easily see exactly where you've applied it, ensuring you don't miss a spot inside or outside the nozzle.

Using E-WELD NOZZLE doesn't just save you time; it saves your gear. Constant scraping wears down the threads and insulation on your nozzles, forcing you to replace them sooner. By keeping the spatter from sticking in the first place, your consumables last longer, and your welds look better. It allows the gas to flow freely, giving you that smooth, hissing coverage you want for a perfect weld. Grab a can of 53F212 and experience the difference of a truly professional-grade anti-spatter.