Skip to Main Content
Canadian
Canadian owned and operated

GF-5 - Gasflux Type B Liquid Flux 5 Gallon Refill

Packaging: 1 per each
$321.14/ea $229.39/1 per each only $229.39/eaSave 29%

Usually ships within 3-5 business days

OVERVIEW

The Professional's Choice for Clean Brazing

If you do a lot of brazing, you know that stopping to dip your rod in flux or brushing on paste can break your rhythm. The Gasflux 5 Gallon Pail (GF-5) is the ultimate refill solution for your shop's flux dispenser. This is the famous blue liquid that turns a standard oxy-fuel torch into a precision brazing tool. By feeding the flux right through the flame, you get a bright, green-hued flame that cleans the metal as you heat it, letting you see the puddle clearly without fighting through a crust of burnt paste.

This 5-gallon supply ensures you won't run dry in the middle of a big project. It works with your existing Gasfluxer to deliver the exact amount of flux needed—no more, no less. The result is a braze joint that looks like TIG: smooth, clean, and incredibly strong. Plus, the cleanup is a breeze. While paste flux leaves a rock-hard glass slag that ruins grinding wheels, Gasflux residue usually wipes off with warm water or a wire brush.

Why Welders Prefer Liquid Flux

  • Superior Visibility: No white powder cloud or thick paste to block your view of the joint.
  • Better Penetration: The flux flows ahead of the alloy, pulling the silver or bronze deep into the joint.
  • Less Mess: Say goodbye to chipping hammers and heavy grinding; the finished joint is nearly clean right after cooling.
  • Consistent Results: Because the flux is in the flame, you can't accidentally skip a spot or apply too little.
Additional Information
Packaging Description:5 Gallon Pail
Format:Liquid
Product:Gas Flux
Volume:5 Gallon
Container Type:Steel Pail
Process:Brazing
Compatible Fuel Gases:Acetylene, Propane, Propylene, Natural Gas

INCLUDED

  • 1x 5 Gallon Steel Pail of Liquid Gasflux

APPLICATIONS

  • Automotive component manufacturing
  • HVAC and refrigeration piping
  • Metal furniture fabrication
  • Bicycle frame building
  • Tube and pipe fabrication
  • General maintenance and repair brazing

FAQ

This liquid is designed to be poured into the reservoir of a Gasfluxer or similar flux dispensing unit. The fuel gas then bubbles through the liquid, picking up the flux vapor before going to the torch.

It is excellent for brazing mild steel, stainless steel, copper, brass, and various nickel alloys. It is not intended for aluminum or magnesium.

No, this is a liquid flux specifically formulated for vapor introduction via the fuel gas stream. It is not designed to be brushed on like a paste.

Yes, Gasflux works with all common fuel gases, including Acetylene, Propane, Propylene, Natural Gas, and MAPP.

No, that is one of its main advantages. The residue is minimal and usually washes off with water, unlike the hard glass-like slag left by borax pastes.

When stored in a sealed container in a cool, dry place, the shelf life is indefinite. Ensure the cap is tight to prevent evaporation of the solvent carrier.

Yes, the liquid contains volatile solvents and is flammable. It must be handled with care and stored away from open flames or sparks when not in use.

If used correctly, it actually helps keep tips clean. However, if the fluxer is overfilled or the gas flow is too high, liquid carryover can occur. Always follow the dispenser's instructions.