Victor 40mm High Pressure Oxygen Gauge 3000 PSI Replacement

Keep Your Oxygen Regulator Safe and Accurate

A broken or unreadable gauge on your oxygen regulator isn't just an annoyance—it's a safety hazard. The Victor 1435-0221RP Replacement Gauge is the exact part you need to get your gear back in top shape. Designed for the "high side" of your regulator, this gauge tells you exactly how much oxygen is left in your tank, so you never run out in the middle of a critical cut or weld. With a clear, easy-to-read 40mm face, you can check your levels at a glance.

Dual Scale for Easy Reading

Whether you are used to thinking in PSI or Bar, this gauge has you covered. The face features a dual scale that reads up to 3000 PSI and 200 Bar. This range is perfect for standard oxygen cylinders, which usually come filled to around 2200 PSI. The markings are crisp and high-contrast, making it easy to read even in dimly lit shops or out in the field. The compact size ensures it fits neatly on your regulator without getting in the way of your adjusting knob or hoses.

Genuine Victor Quality

When dealing with high-pressure oxygen, you don't want to take chances with cheap, generic parts. This is a genuine Victor component, built to the same quality standards as the original gauge that came with your regulator. It is cleaned and prepped specifically for oxygen service, ensuring it is safe to use right out of the box. Cheap gauges that aren't properly cleaned can react dangerously with pure oxygen—stick with the brand you trust.

Easy Installation

Swapping out a gauge is a straightforward repair that can extend the life of your expensive regulator. Simply depressurize your system, remove the old gauge, and install the new Victor 1435-0221RP. Make sure to use an oxygen-safe Teflon tape or sealant on the threads to ensure a leak-tight seal. Once installed, you'll have the peace of mind that comes with accurate pressure monitoring and reliable equipment performance.