Skip to Main Content
Canadian
Canadian owned and operated

TS10 - Turbo Sharp-X Enclosed Tungsten Electrode Grinder

Packaging: 1 of each
$1,756.10/ea $1,402.86/1 of each only $1,402.86/eaSave 20%

Usually ships within 3-5 business days

OVERVIEW

Achieve Perfect TIG Welds with the Turbo Sharp-X

For the professional TIG welder, the quality of the arc starts at the tip of the tungsten. The CK Worldwide Turbo Sharp-X Tungsten Grinder is the ultimate solution for eliminating arc wander, erratic starts, and tungsten contamination. Unlike standard bench grinders that can leave jagged edges and contaminate your electrode with debris from other metals, the Turbo Sharp-X uses a dedicated diamond wheel to produce a perfectly longitudinal grind every time. This longitudinal grain direction is crucial for allowing electrons to flow smoothly off the tip, resulting in a focused, stable arc and deeper penetration.

Safety First: One of the biggest hazards in TIG welding isn't just the UV light—it's the dust from grinding thoriated tungsten. The Turbo Sharp-X features a fully enclosed housing that captures hazardous dust, keeping your lungs and your shop clean. This makes it an essential addition to any shop prioritizing health and safety compliance. You can sharpen your electrodes right at your weld station without worrying about breathing in radioactive particles.

Save Money on Consumables: We know that diamond grinding wheels are an investment. That's why the Turbo Sharp-X is designed to make them last. With its innovative 3-position adjustment, you can slide the head to use a fresh section of the wheel once the center wears down. Combined with a double-sided wheel, you get up to three times the life out of a single disc compared to older models. Plus, the precise grinding removes only the minimum amount of tungsten needed to restore a point, extending the life of your electrodes themselves.

Whether you are welding thin aluminum that requires a balled tip or precision stainless steel needing a razor-sharp needle point, the adjustable angle guide (20 to 60 degrees) gives you total control. The included carrying case makes it easy to take this precision tool from the shop to the job site, ensuring you never have to settle for a sub-par grind again.

Additional Information
Brand:CK Worldwide
Item:Grinder
Packaging Description:1-per-each
Input Voltage:120V AC
Power:710 W
Frequency:60 Hz
Tungsten Diameter Capacity:.040" (1.0mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm)
Grinding Angle Range:20° - 60°
Warranty:2 Years

INCLUDED

  • 120V Turbo-Sharp X Grinder
  • Standard Head for diameters .040" to 1/8"
  • Accessory Carrying Case
  • Spare Tools for adjustment
  • Instruction Manual

APPLICATIONS

  • Precision TIG Welding (GTAW) preparation
  • Plasma Welding (PAW) electrode sharpening
  • Aerospace and nuclear welding applications requiring dust containment
  • Field welding operations requiring portable sharpening tools
  • Shops using thoriated tungsten needing safety compliance
  • Automotive fabrication and roll cage construction
  • Pipe welding and sanitary stainless steel fabrication

FAQ

The standard head included with the TS10 can grind tungsten diameters of .040" (1.0mm), 1/16" (1.6mm), 3/32" (2.4mm), and 1/8" (3.2mm).

Yes, the Turbo Sharp-X is an enclosed electrode grinder designed to contain grinding dust, which is especially important when grinding radioactive thoriated tungsten.

Yes, the grinding angle is fully adjustable from 20 degrees to 60 degrees, allowing you to customize the tip geometry for your specific welding application.

The CK Worldwide TS10 operates on standard 120V AC, 60 Hz power.

The head of the grinder can be moved to three different positions. This allows you to grind on different areas of the diamond disc, effectively tripling the lifespan of the wheel before it needs replacement.

Yes, the diamond-powder coated grinding disc is coated on both sides, doubling the wheel life compared to single-sided discs.

Yes, the product includes a carrying case, the 120V grinder, and spare tools.

The standard unit goes up to 1/8 inch. However, it can be equipped with an optional grinder head (TS3-HR) to handle diameters up to 1/4 inch (6.4mm).