Canadian owned and operated
Get the most out of your welder with the Dinse 35-50 Cable Connector Plug. If you are running a Crossfire SDW-210E or any machine with standard large Dinse sockets, this is the plug you need to build or repair your welding leads. A solid connection at the machine is the foundation of a good weld; a loose or worn connector can cause heat buildup, erratic arcs, and even damage to your welder's terminals. This heavy-duty male plug ensures your power gets to the puddle where it belongs.
Welding cables take a beating, and your connectors need to be just as tough. This plug features a solid brass pin for maximum current flow and a heavy-duty rubber boot that resists cuts, burns, and oil. The twist-lock design is the industry standard for a reason: it's fast, it's secure, and it doesn't vibrate loose. Simply plug it in, give it a quarter-turn clockwise, and you are locked in and ready to weld. When you need to pack up, a quick twist releases the cable, making it easy to coil your leads and transport your machine.
You don't need a soldering iron or special crimpers to install this plug. It uses a simple hex-key set screw design. Just strip back the insulation on your welding cable (fits sizes #2 through 1/0), insert the copper strands into the brass barrel, and tighten down the screw. Slide the rubber cover back over the assembly, and you are done. It’s perfect for making on-the-fly repairs at the job site or customizing your lead lengths in the garage.
The "35-50" designation refers to the cable cross-section range (35mm² to 50mm²), but it also tells you this is the larger of the two common Dinse sizes (the smaller being 10-25). This size is standard on most 200-amp and larger MIG, TIG, and Stick machines. Whether you are replacing a melted plug or building a heavy-duty extension lead, this connector gives you the professional performance and safety you need to weld with confidence.
| Additional Information |
|---|
| Cable Size:35-50 mm² |
| Receptacle Type:Male |
| Packaging Description:1 per each |
| Connector Type:Dinse 35-50 |
| Material:Brass, Rubber |
| Amperage Rating:200A - 300A |
