300956 - Miller Industrial Dual MIG Connection Kit with 4/0 Cables and Regulators

Get Your Dual Feeder Running Right

So, you've got a dual wire feeder to help speed up production, but now you need to hook it up. Don't waste time hunting down individual cables and hoping the lugs fit. The Miller 300956 Industrial Dual MIG Kit is the "one-box" solution to get your rig powered up and breathing gas. Designed for the serious industrial welder, this kit packs the heavy-duty components you need to push high amps without worrying about your cables getting hot or your gas flow fluctuating.

Big Power Needs Big Cable

When you are burning wire all day, you can't skimp on copper. This kit comes with 4/0 (0000) welding cable. That is some of the thickest, most conductive cable you can run for standard setups, ensuring you get every amp your machine puts out right to the feeder. No voltage drop, no overheating. Just smooth, consistent power. The cables are 10 feet long, giving you enough slack to position your feeder where you need it without creating a tripping hazard of excess coil. Plus, they come pre-terminated with Dinse connectors. If you've ever struggled with bolt-on lugs stripping out or wiggling loose, you know why we love Dinse plugs. Just plug, twist, and you are locked in for good.

Two Gases, Two Regulators

The beauty of a dual feeder is running mild steel on one side and stainless or aluminum on the other. That usually means two different gas mixes. Miller hooks you up with two top-of-the-line Miller | Smith flowmeters in this kit. These aren't cheap throw-away gauges; these are precision instruments that let you dial in your CFH exactly where you need it. Consistent gas coverage means less spatter, no porosity, and less time grinding out bad welds. The kit also includes the gas hoses to run from your tanks to the feeder.

Why Buy the Kit?

Could you piece this together yourself? Maybe. But by the time you buy two high-end regulators, 20 feet of 4/0 cable, and the correct Dinse connectors, you've likely spent more money and definitely spent more time. This kit is factory-matched for Miller industrial equipment. It’s built to last, it fits right the first time, and it gets you back under the hood faster. Whether you are setting up a new Continuum or upgrading an old Deltaweld, this kit is the professional choice for dual feeder connections.