L08010 - Lenco CT-10 45-Degree Copper Terminal Lug (1/0 - 2/0 Cable)

Save Your Cables with the Lenco CT-10 Angled Lug

If you are tired of your welding leads fraying and breaking right where they bolt onto the machine, the Lenco CT-10 45-Degree Terminal Lug is the solution you need. Standard straight lugs often force your heavy welding cable to bend at a sharp 90-degree angle as it hangs off the front of the welder. Over time, gravity and constant movement cause the copper strands inside the insulation to snap, leading to hot spots, poor arc starts, and eventually a melted cable. The CT-10 solves this by kicking the cable out at a 45-degree angle, allowing it to drape naturally towards the floor without kinking.

Built by Lenco, a trusted name in arc welding accessories, this lug is designed for the daily grind of the shop. It fits standard 1/0 and 2/0 welding cables, covering the most common sizes for general fabrication and structural work. You don't need a heavy-duty crimper or a hammer to install this lug. It features a strong mechanical set screw design—just strip your cable, slide it into the copper barrel, and tighten the screw down with an Allen wrench. The connection is solid, conductive, and won't wiggle loose under vibration.

This lug bolts directly to the output studs of your welder (fits standard 1/2" studs). Whether you are setting up a new machine or replacing a burnt-out connection on an old reliable power source, the Lenco CT-10 ensures you get all the power from your machine to your torch. It's a small upgrade that makes a big difference in the longevity of your leads and the consistency of your welds. Stop fighting with bad connections and equip your machine with professional-grade terminals.