RL1020 - Heavy Duty Cast Copper Solder Lug for 1/0-2/0 Cable

Reliable Copper Lugs for Custom Cable Repair

When you're building custom welding leads or repairing a damaged cable in the field, you need a connection that isn't going to fail when the heat is on. The RL1020 Solder-On Lug is the old-school, heavy-duty solution for terminating your 1/0 or 2/0 welding cables. Made from solid cast copper, these lugs are built to carry the current without getting hot, ensuring you get the full power of your machine right to the arc.

Forget about finding a hydraulic crimper; these lugs are designed for a classic solder connection. Just strip your cable, flux it up, heat the lug with a torch, and flow the solder in for a bond that is stronger than the wire itself. The flared end makes it easy to slide your frayed cable strands in without a fight. Once cooled, you have a solid, permanent connection that won't loosen up from vibration or get eaten away by corrosion inside the joint.

These lugs are perfect for replacing worn-out ends on your stingers or ground clamps. The heavy cast copper body can take a beating around the shop floor, and the flat mounting surface ensures a good contact patch with your machine studs or ground clamp bolts. Whether you are outfitting a new rig or fixing up old leads, the RL1020 gives you the professional, high-conductivity connection your work demands.