Skip to Main Content
Canadian
Canadian owned and operated

95201102 - Tweco T-120 Copper Lug for 1/0-2/0 Cable

Packaging: pack of 10
$14.78/EA $107.00/pack of 10 only $10.70/EASave 28%

Usually ships within 3-5 business days

OVERVIEW

Keep Your Arc Strong with Tweco

When you are in the middle of a job, the last thing you want to worry about is your equipment failing you. A welding machine is only as good as the connections that deliver the power, and that’s where the Tweco T-120 Power Cable Lug comes in. Designed for the professional welder who demands reliability, this lug is the industry standard for terminating 1/0 and 2/0 welding cables. Whether you are building a brand-new set of leads or fixing a frayed connection that’s been giving you trouble, the T-120 is the heavy-duty upgrade your rig needs.

Built for the Shop Floor

Tweco knows that welding environments are tough. Cables get dragged across concrete, yanked around corners, and exposed to extreme heat. The T-120 lug is built to handle it all. Made from solid copper alloy, it doesn't just conduct electricity efficiently—it stands up to the abuse of daily use. The 17/32-inch hole is perfectly sized to slide onto the 1/2-inch studs found on most major welding machines, ground clamps, and quick-connects. No more drilling out undersized lugs or dealing with flimsy terminals that bend when you tighten them down. This is a solid piece of hardware designed to stay put.

Easy to Install, Hard to Break

We know that time is money, and you don't want to spend all day fixing cables. The Tweco T-120 gives you options. If you need a quick fix in the field, you can use a mechanical connection to clamp it down tight and get back to welding in minutes. If you are in the shop and want a connection that will last a lifetime, heat it up and solder it on. The copper takes solder beautifully, giving you a fused connection that won't vibrate loose no matter how much you move your leads.

Why It Matters

A bad ground or a loose terminal doesn't just waste power; it makes your arc sputter and wander, ruining your bead and frustrating you. By using a high-quality lug like the T-120, you ensure that every amp your machine puts out makes it to the puddle. It’s a small part that makes a big difference. Don't let a cheap connector be the weak link in your chain. Grab a Tweco T-120, secure your leads, and weld with the confidence that your power delivery is rock solid.

Additional Information
Cable Size:1/0 to 2/0 AWG
Packaging Description:1 per each
Model:T-120
Stud Hole Size:17/32" (13.5mm)
Material:Copper Alloy
Connection Type:Mechanical / Solder
Amperage Capacity:225A - 300A (Dependent on Cable)

INCLUDED

  • 1 x Tweco T-120 Copper Cable Lug
  • 1 x Ball-Point Set Screw (if applicable for mechanical connection)

APPLICATIONS

  • Termination of welding power cables to machine output studs
  • Connection of ground cables to earth clamps
  • Repairing damaged cable ends on 1/0 and 2/0 leads
  • Custom fabrication of welding stingers and whips
  • Industrial battery and power distribution connections

FAQ

The Tweco T-120 is designed to fit 1/0 AWG and 2/0 AWG welding cables.

The stud hole diameter is 17/32 inches, which is designed to fit standard 1/2-inch studs.

Yes, the Tweco T-120 is made of copper alloy and is designed to be installed via solder or mechanical connection.

Typically, the T-120 includes a ball-point screw for mechanical installation, though soldering is also a common installation method.

This lug is primarily designed for copper welding cable. Using it with aluminum cable may require special oxidation inhibitors and is generally not recommended without specific compatibility checks.

Strip the cable insulation, insert the bare copper into the lug, secure it (solder or screw), and then bolt the lug's eyelet onto your machine's output stud.

It is manufactured from a high-conductivity copper alloy to ensure minimal resistance and durability.

Absolutely. It is perfect for attaching your ground cable to the ground clamp or the machine.