10373399 - Nederman NEX HD Replacement Front Hose 160mm

Get Your Suction Back: Nederman NEX HD Hose Replacement

You know the drill: you position your fume arm, strike an arc, and realize the smoke isn't going anywhere because the hose near the hood is tattered, taped up, or leaking. The front hose of your extraction arm takes a beating. It's the part you grab, pull, and twist all day long. It's also the closest part to the heat and sparks. Over time, even the toughest gear wears out. When that happens, you lose suction, and your breathing zone gets compromised.

The Nederman 10373399 Front Hose Complete is the direct replacement for your NEX HD arm. This isn't a generic dryer vent hose; it's the heavy-duty, spark-resistant flexible tubing built to handle the nasty stuff you work with—heavy smoke, metal dust, and heat. Because it is an official Nederman part, it fits perfectly. You won't have to fight with it to get it clamped on, and you won't need half a roll of duct tape to seal the seams.

Why replace it?

• Better Health: A leaky hose means fumes escape into the shop instead of going into the filter. Protect your lungs.
• Better Visibility: Good suction pulls the smoke away from your puddle, letting you see your weld clearly.
• Easy Fix: This is the "complete" front section, designed to swap out the damaged end of your arm quickly so you can get back to fabrication.

This hose is sized at 160mm (about 6 inches), which is the standard for the NEX HD arms found in many heavy fabrication shops. If your arm is struggling to stay in place or feels like it's lost power, check that front hose. If it's full of holes, swap it out with this genuine replacement and get your airflow back to 100%.