K52015-6005 - Lincoln CS450 Heavy Duty Cross Slide 60x5

Get Your Torch Exactly Where You Need It

When you are running a mechanized welding setup, close enough isn't good enough. You need your arc to be dead center in the joint, every single time. The Lincoln Electric CS450 Cross Slide Assembly (K52015-6005) is the heavy-duty hardware that makes that happen. Designed for welders who operate manipulators, side beams, or custom automatic rigs, this cross slide gives you the control you need to dial in your torch position with confidence.

The "60 X 5" configuration of this assembly offers a specific range of adjustment, allowing you to tweak the horizontal and vertical position of the gun without having to stop the machine and unbolt fixtures. The adjustment knobs are smooth and responsive, meaning you can make those tiny corrections on the fly if you see the wire wandering slightly from the seam. It’s built tough, too—Lincoln knows that welding shops are dirty, hot, and rough on equipment. That’s why the CS450 is constructed to resist jamming from grinding dust or spatter build-up.

Whether you are welding thick plate with Sub Arc or running long MIG seams on a tank, stability is key. A wobbly slide means a wobbly weld. This assembly locks down tight, holding your heavy torch gear steady so you don't get vibration transferring to the arc. It’s a straightforward, reliable piece of gear that solves the headache of torch alignment, letting you focus on the puddle and the parameters rather than fighting with the fixture.

Built for the Shop Floor

Installing the K52015-6005 is straightforward for anyone familiar with Lincoln automation gear. It bolts up securely to standard carriages and mounts. Once installed, it becomes the steering wheel for your welding head. If you are tired of fighting with worn-out slides that stick, slip, or drift, upgrading to a fresh CS450 assembly will feel like a night-and-day difference in your daily operation.