0700200088 - ESAB Replacement Steel Liner for Caddy Mig C200i (.035-.045)

Keep Your Caddy Mig Running Smoothly

There is nothing more frustrating than a wire feed issue right in the middle of a bead. If you are experiencing stuttering wire, erratic arcs, or the dreaded bird-nest at the drive rolls, your liner is likely the culprit. The ESAB 0700200088 Steel Liner is the direct replacement part you need to get your ESAB Caddy Mig C200i back to welding like new. Designed specifically for .035" to .045" wire, this liner ensures your machine feeds consistently, job after job.

Think of the liner as the highway for your welding wire. Over time, that highway gets potholed and clogged with dirt, metal shavings, and shop grime. When that happens, the wire drags, the arc sputters, and your welds suffer. Swapping out your old, kinked, or dirty liner for a fresh steel one is one of the cheapest and most effective tune-ups you can perform on your MIG gun. This steel spiral liner is built tough to handle the friction of steel and flux-cored wires, guiding them smoothly from the feeder to the tip without buckling.

Installation is straightforward for anyone familiar with MIG gun maintenance. The liner comes in a 13-foot length, ready to be installed in your torch cable. Remember to lay your torch out straight when installing, and trim the excess liner at the front end carefully to ensure a tight fit against the diffuser—this prevents wire shaving and gas turbulence. Don't let a cheap consumable slow down your production or ruin your workpiece.

Whether you are in the shop fabricating brackets or out in the field doing repairs, having a spare liner in your kit is just smart welding. This genuine ESAB part guarantees compatibility with your Caddy Mig C200i, so you don't have to guess if it will fit. Stick to genuine parts for the best performance and longevity of your equipment.