Skip to Main Content
Canadian
Canadian owned and operated

173921 - Miller Positive Battery Cable Assembly 4 AWG 28-Inch

Packaging: 1 PER EA
$222.02/EA $156.34/1 PER EA only $156.34/EASave 30%

Usually ships within 3-5 business days

OVERVIEW

Get Your Welder Started with the Miller 173921 Cable

There is nothing more frustrating than arriving at a job site, setting up your rig, and turning the key on your engine drive welder only to hear a click or a slow groan. Often, the culprit isn't the battery itself or the starter, but the cables connecting them. Over time, battery cables on welding trucks and portable machines take a beating. Vibration, corrosion from battery acid, and exposure to the elements can degrade the copper strands inside the jacket, leading to poor connection and starting failure. The Miller 173921 is the direct replacement positive battery cable you need to get your machine firing up reliably again.

This isn't just a generic cable you pick up at the auto parts store that might be too long or too short. This is the genuine Miller part, cut to the exact 28-inch length required for your machine. It comes pre-assembled with a heavy-duty positive battery clamp on one end and a sturdy ring terminal on the other. This means you don't have to mess around with stripping wires, crimping lugs, or trying to make a generic cable fit. It is a true plug-and-play solution designed to route perfectly through your machine's housing without rubbing or stretching.

The cable is built with 4-gauge wire, which is thick enough to carry the cranking amps your engine needs but flexible enough to install easily. The 0.312-inch ring terminal fits perfectly onto your starter solenoid stud. By replacing your old, green, corroded cables with fresh copper, you ensure that your battery delivers full power to the starter every time. Don't let a bad $30 cable cost you hundreds in lost downtime. Keep your Miller engine drive running at peak performance with authentic replacement parts.

Installation is straightforward: simply disconnect the negative cable first for safety, remove the old positive cable, route the new Miller 173921 in its place, and tighten down the connections. It’s a quick fix that can save you a lot of headaches on the job.

Additional Information
Brand:Miller
Packaging Description:1 Per Ea
Product Type:Battery Cable Assembly
Wire Gauge:4 AWG
Length:28 in
Polarity:Positive
Terminal Type 1:Battery Clamp
Terminal Type 2:0.312 Inch Ring Terminal

INCLUDED

  • (1) Positive Battery Cable Assembly (28-inch, 4 AWG)
  • (1) Pre-attached Battery Clamp
  • (1) Pre-attached 0.312 Ring Terminal

APPLICATIONS

  • Replacement of corroded or damaged positive battery cables on Miller engine-driven welders.
  • Restoring proper starting performance to welding generators.
  • Maintenance of fleet welding equipment.

FAQ

The cable is exactly 28.000 inches long, designed for specific chassis routing.

This assembly uses 4 AWG (American Wire Gauge) wire.

Yes, it comes with a pre-attached positive battery clamp on one end.

The ring terminal has a 0.312-inch opening, which is approximately 5/16 of an inch.

This is a Positive battery cable.

This part fits specific Miller engine drives. You should verify compatibility using your machine's serial number and parts manual.

Using 4 AWG ensures sufficient current reaches the starter without excessive voltage drop, which is critical for reliable engine starting.

While it is a standard 4 AWG cable, the length and terminal types are specific to Miller equipment. It can be used elsewhere if the specs match your needs.
Google Rating
4.9
Based on35reviews
×
js_loader