36N05 - Split Rubber Grommet 0.31 ID x 0.50 OD - Cable Protection Bushing

Quick Fix for Frayed Wires and Panel Pass-Throughs

Keep your welding rig running safely and smoothly with the ESAB 36N05 Split Rubber Grommet. We all know that vibration is the enemy of welding equipment. Over time, the constant hum of a power source or the movement of a wire feeder can cause cables to rub against the metal casing of your machine. Once that insulation wears through, you're looking at blown fuses, erratic arc performance, or a machine that simply won't start. This high-quality rubber grommet is the simple, effective solution to stop that wear and tear before it becomes a major repair bill.

No Disassembly Required

The best part about this grommet is the split design. If you spot a grommet that has cracked or fallen out, you don't have to waste an hour unhooking wires, cutting zip ties, and re-terminating connections just to slide a new one on. You simply open the split, wrap it around the wire right where it is, and snap it into the 1/2-inch hole on your machine's case. It’s a five-second fix that saves you massive headaches down the road. It’s the perfect spare part to keep in your maintenance kit or toolbox.

Built for the Shop

This isn't just a cheap piece of plastic; it's a durable rubber component designed to withstand the heat and grime of a welding shop. It fits snugly around cables up to 0.31 inches thick, holding them centered and secure. Whether you are restoring an old Miller or Lincoln machine, or just patching up your trusty ESAB unit, this grommet fits standard half-inch knockouts perfectly. It acts as a shock absorber for your wiring, reducing strain on internal connections.

Protect Your Investment

Don't let a ten-cent problem turn into a five-hundred-dollar board replacement. Inspect your equipment regularly for missing or dry-rotted grommets. Replacing them with the 36N05 ensures your machine maintains its professional appearance and, more importantly, its electrical safety. It is ideal for protecting gas solenoids wires, fan power leads, and control harnesses as they route through the internal sheet metal of your welder.