OJ309LP00000450F00 - Kobelco Premiarc DW-309LP .045 Stainless Flux Core Wire 28lb

Master Dissimilar Welds with Kobelco DW-309LP

If you are welding stainless steel to mild steel and need a wire that behaves itself in every position, the Kobelco Premiarc DW-309LP is your answer. This isn't just another flux core wire; it's built for the real-world challenges welders face when fitting up tanks, pipes, or structural supports where you can't always rotate the piece to the flat position. The 'LP' stands for 'Low Carbon, Positional', and it lives up to the name. You can run a vertical-up stringer that lays flat, wets out at the toes, and doesn't drip on you.

One of the biggest headaches with stainless flux core is the slag. Kobelco has nailed the formula here—the slag cools fast to hold your puddle in place but pops off easily once you're done. Often, it just curls up and falls off by itself as the weld cools, leaving a shiny, bright bead underneath that looks like you spent hours polishing it. This 28lb spool of .045" wire is the perfect size for industrial feeders, giving you plenty of run time between changeovers.

Whether you are using straight CO2 to save money or an Argon mix for that buttery smooth feel, this wire runs stable with almost zero spatter. It’s perfect for those transition joints where you are welding a stainless bracket to a mild steel frame, or putting a buffer layer down before hardfacing. Stop fighting your puddle and start stacking dimes in any position with the DW-309LP.