101282 - ER308L Stainless TIG Welding Rod - 1.6mm (1/16") - 10lb Tube

Smooth Running 308L Stainless TIG Rods

If you are welding 304 stainless steel and need a rod that flows like butter, the Central Wire ER308L 1.6mm TIG rod is your go-to filler. We know that in the shop, fighting your filler metal is the last thing you want to do. That's why these rods are drawn and cleaned to perfection, ensuring you don't get any nasty surprises in your puddle. The 1.6mm (1/16 inch) size is the perfect middle ground—small enough for delicate corner joints on thin sheet metal but substantial enough to lay down a solid root pass on pipe.

The 'L' in 308L stands for Low Carbon. Why does that matter to you? It means the weld won't rust out from the inside later on. It keeps the stainless properties intact even after you've hit it with the torch. These rods wet out beautifully at the toes of the weld, making it easier to get that stack-of-dimes look that customers love. They are compatible with any standard TIG machine set up for DCEN (Direct Current Electrode Negative) and require 100% Argon shielding gas for the best results.

Packaged in a durable 10lb tube, these rods stay straight and clean until you're ready to use them. No more bent rods or contamination from sitting out on the bench. Whether you are building a custom exhaust, repairing a kitchen sink, or fabricating a tank, these 308L rods give you the control and quality you need to be proud of your work. Just clean your base metal, sharpen your tungsten, and get to welding.

Usage Tips

For the best results, ensure your base material is free of oil, grease, and oxides before welding. Use a dedicated stainless steel wire brush to avoid cross-contamination from carbon steel. Maintain a short arc length and keep your shielding gas flowing until the puddle solidifies to keep the crater bright and shiny.