ER316L Stainless TIG Welding Rod 1/16" - 10lb Tube

Achieve Flawless Stainless Welds with ER316L TIG Rods

When your project demands the highest level of corrosion resistance and a weld bead that looks as good as it holds, reach for the Central Wire ER316L TIG rod. This 1.6mm (1/16") filler metal is the go-to choice for professional welders working with 316 series stainless steel. Whether you are fabricating sanitary piping for a brewery, repairing marine hardware, or building custom chemical tanks, this rod delivers the smooth, buttery run you expect from a top-tier consumable.

The 1/16" diameter is incredibly versatile, offering enough body to fill joints on 1/8" plate while still being fine enough to control the puddle on thinner gauge tubing without blowing through. The ER316L formula includes Molybdenum, which acts like a shield against rust and pitting, especially in salty or acidic environments. If you've ever seen a stainless weld rust out in the heat-affected zone, it was likely the wrong filler metal or too much heat input—using this Low Carbon (L-grade) rod helps protect your work from that internal decay, keeping your reputation for quality intact.

Why Welders Prefer This Rod:

• Smooth Wetting: The puddle flows out evenly, tying into the toes of the weld effortlessly for that 'stack of dimes' appearance.
• Clean Finish: Manufactured with a bright, clean surface finish to minimize impurities that cause porosity or inclusions.
• Easy Identification: No more guessing games; these rods are typically stamped or flagged, so you know exactly what you are pulling from the tube.

Packaged in a durable 10lb tube, these 36-inch rods stay straight and clean until you're ready to burn them. For best results, ensure your base material is free of oil and grease (wipe with acetone), use a sharp thoriated or lanthanated tungsten, and keep your shielding gas coverage adequate. This rod is designed to make you look good, providing a defect-free deposit that polishes up beautifully for architectural or food-grade applications.