IANICRMO393E - Exocor ENiCrMo-3 Inconel 625 Stick Electrode 3/32" 10lb

Get the Job Done with Exocor Inconel 625 Stick Rods

When you are faced with a repair job involving unknown high-grade alloys or need to weld stainless steel to mild steel without worrying about cracks down the road, the Exocor ENiCrMo-3 (Inconel 625) stick electrode is the rod you want in your stinger. This 3/32" electrode is a problem-solver for the professional welder. It is designed to run smooth on DC+ (reverse polarity), giving you a buttery arc that doesn't fight you, even when you are welding out of position. Whether you are patching up a furnace, fixing a marine exhaust manifold, or welding on heavy equipment that takes a beating, this rod puts down metal that is tougher than the base material itself.

One of the biggest headaches with nickel alloys can be the slag—it is often thick and hard to remove. Exocor has formulated this coating to release slag easily, so you spend less time chipping and grinding and more time burning rod. The 3/32" size is perfect for all-position work; it is small enough to control the puddle in vertical-up welds but carries enough filler for decent deposition rates on flat joints. The bead wets out nicely at the toes, reducing the chance of undercut, which is critical when you are working on expensive parts where mistakes are costly.

This 10lb tube is an investment in versatility. You might not use it every day, but when a job comes in requiring high heat resistance or extreme corrosion protection, you will be glad you have it. It is commonly used for "buttering" carbon steel faces before welding them to stainless, preventing the formation of brittle zones. Keep these rods stored in a dry place or a rod oven to maintain that premium arc performance. If you are looking for a rod that handles the nastiest environments and the trickiest dissimilar joints, the Exocor ENiCrMo-3 is your best bet.