S112232-045 - Hobart 335A E6011 Stick Electrode 3/32 Inch 5lb Pack

Get the Job Done with Hobart 335A E6011 Rods

When you are out in the field or working on a repair job where the metal isn't perfectly clean, you need a welding rod that doesn't mess around. The Hobart 335A E6011 is that rod. Known among welders for its ability to "dig," this 3/32-inch stick electrode is your go-to solution for welding through rust, dirt, paint, and especially galvanized steel. If you have ever struggled with an erratic arc or excessive spatter while trying to burn through a zinc coating, the 335A will be a welcome upgrade. Hobart has formulated this electrode to provide a much more stable arc and significantly less spatter than your average hardware store 6011, giving you better control over the puddle and a cleaner finish.

One of the biggest advantages of the Hobart 335A is its versatility. Whether you are running an old AC tombstone welder in the garage or a modern DC rig on a job site, this rod runs smoothly on both AC and DCEP. It is an all-position rod, meaning you can tackle vertical-up, vertical-down, and overhead welds without fighting the puddle. The fast-freeze puddle characteristics make it excellent for bridging gaps on poor fit-ups, which is a common scenario in farm repairs, trailer fixes, and general fabrication work.

The 3/32-inch diameter is perfect for a wide variety of material thicknesses. It is small enough to handle lighter gauge sheet metal without blowing through instantly, yet robust enough to lay down a solid root pass on heavier plate. Because it is a cellulosic rod, it provides that deep penetration you need to ensure the weld holds tight, even if the prep work wasn't perfect. It is the kind of rod you keep in your truck or shop because you know it will work when other rods, like 7018s, might struggle with the surface conditions.

This product comes in a convenient 5 lb plastic pack. If you don't burn through 50 pounds of rod a week, this size is perfect. The plastic packaging helps keep the rods dry and prevents the coating from chipping off if the box gets banged around. Whether you are fixing a gate, working on a railcar, or doing structural repairs on a ship, the Hobart 335A delivers the reliability and bite you need to make a solid weld every time.