S115951-089 - Hobart 718MC E7018-1 Stick Electrode 5/32" 10lb Pack

Smooth Running 7018-1 for Critical Work

For welders who demand operator appeal alongside structural integrity, the Hobart 718MC 5/32" stick electrode is a top-tier choice. Known for its smooth, stable arc, this rod takes the frustration out of out-of-position welding. If you are welding vertical up or overhead, the puddle control provided by the 718MC is exceptional, allowing you to lay down flat, consistent beads with minimal effort. The "MC" stands for Moisture Control, which means these rods resist absorbing humidity from the air better than standard 7018s, giving you more confidence that your welds will pass inspection without porosity or cracking issues.

One of the biggest advantages you will notice immediately is the slag release. Nothing slows down a job like fighting to chip off stubborn slag, especially in deep grooves or tight corners. The Hobart 718MC features a slag system that often curls up and peels off on its own or removes easily with a light tap, saving you time on cleanup and inter-pass grinding. The spatter levels are very low, which keeps your workpiece clean and reduces post-weld finishing time. This makes it a favorite for field erections and on-site repairs where efficiency is key.

This 10lb pack is the perfect size for your truck or job box, ensuring you have high-quality filler metal ready without lugging around a heavy 50lb tin. The 5/32" diameter is a workhorse size for filling joints in heavy plate, structural beams, and heavy equipment repairs. It runs smoothly on both AC and DCEP, so whether you are running a shop machine or a portable engine drive, you can expect consistent performance. The bead appearance is excellent, with a fine ripple pattern that makes your work look professional.

Whether you are repairing a bucket on an excavator, welding pipe supports in a refinery, or working on a barge, the Hobart 718MC delivers the toughness you need. It is designed to handle cold environments where impact strength matters, ensuring your welds hold up under stress. If you are looking for a rod that makes you look good and passes X-ray testing with ease, the Hobart 718MC is the electrode to keep in your stinger.