S116744-035 - Hobart Pipemaster 80 E8010-P1 1/8" Stick Electrode 50lb Can

Get the Job Done with Pipemaster 80

When you are out on the right-of-way, you need a rod that drives hard and doesn't quit. The Hobart Pipemaster 80 is built for the pipe welder who demands performance and reliability. This 1/8-inch stick electrode is your go-to solution for welding high-yield pipe, specifically grades X56 through X70. If you are running downhill passes, you know that arc stability and puddle control are everything. The Pipemaster 80 delivers a crisp, digging arc that bites into the metal, giving you the penetration you need for a solid root bead.

One of the standout features of this rod is its "wash-in." It wets out the edges of the joint smoothly, helping you avoid undercut and cold lap, which are critical when you are shooting for X-ray quality. The slag is light and brittle, meaning it chips off easily with a quick rake of your hammer or file, letting you get back to burning rod faster. It’s designed to handle the real-world conditions of pipe welding, including steel with higher silicon content, so you don't have to worry about the chemistry fighting you.

The Pipemaster 80 isn't just for the root; it stacks well for fill and cap passes too, providing a flat bead profile that requires minimal grinding. It runs on DCEP and offers that classic cellulosic feel—aggressive yet controllable. Whether you are working on drill platforms, storage tanks, or miles of pipeline, this rod gives you the confidence that your welds will hold up to inspection and the elements.

Packaged in a heavy-duty 50 lb can, these rods are ready to throw on the rig and head to the job site. When the specs call for an 80-series rod that can handle the vertical-down hustle, reach for the Hobart Pipemaster 80.