61803200 - Bonarc E6011 1/8" All-Position Welding Rods

The Reliable "Farm Rod" for Tough Repairs

When you are out in the field or working on a piece of equipment that has seen better days, you need a welding rod that doesn't complain. The Bonarc E6011 3.2mm (1/8") electrode is built for exactly those situations. Known affectionately by many as a "farm rod" or a "rust buster," this electrode is your best friend when you can't get the metal perfectly clean. Whether you are dealing with rusty gates, painted trailer frames, or galvanized pipe, the E6011 burns right through the crud to give you a solid, penetrating weld.

What sets the Bonarc E6011 apart is its ability to run on just about any welder. If you have an old AC stick welder in the garage, this rod runs beautifully on it. It also runs great on DCEP if you have a modern DC rig. The arc is crisp and digging, which means you get excellent fusion right down to the root of the joint. It's an all-position rod, so if you have to crawl under a chassis to weld overhead or run a vertical bead up a post, the puddle freezes fast enough to keep the metal where you put it, not dripping on the floor.

This 3.2mm size is the sweet spot for general repairs—thick enough to lay down metal on structural steel but controllable enough for slightly thinner brackets and mounts. The slag is light and usually chips off with a quick scrape, letting you see your work immediately. While it doesn't leave the pretty "dime-stack" finish of a 7018, it provides the bite and strength you need for repairs that hold.

Why Welders Choose Bonarc E6011

• AC Compatible: No DC welder? No problem. Runs smooth on AC.
• Rust Fighter: Don't waste hours grinding; this rod handles dirty metal.
• Deep Dig: Gets deep into the corner for strong root passes.
• All-Position: Vertical, overhead, flat—weld it where it sits.

Add a pack of Bonarc E6011 to your rod oven (or dry storage tube) today and be ready for whatever repair job walks through the door.