S249419-027 - Hobart Fabcor 86R 1/16-inch Metal Core Wire 50lb Spool

Superior Arc Performance with Hobart Fabcor 86R

Unlock the potential of your welding setup with the Hobart Fabcor 86R 1/16" metal-cored wire. This 50 lb spool is a powerhouse for welders looking to bridge the gap between the cleanliness of solid wire and the speed of flux-cored welding. The Fabcor 86R is an E70C-6M H4 wire that excels in flat and horizontal positioning, providing a buttery smooth arc that makes laying down perfect beads feel effortless. If you are fabricating heavy equipment, railcars, or structural components, this wire offers the penetration and fill capabilities needed for critical joints.

One of the standout features of the Fabcor 86R is its exceptional wetting characteristics. The molten pool flows out smoothly, washing into the sidewalls to prevent cold lap and lack of fusion defects. This is particularly beneficial when welding on thicker sections where 1/16" diameter wire is preferred. The metal-cored design allows the current to travel through the outer sheath, creating a broader, cone-shaped arc that improves gap bridging compared to solid wires. This means you can handle slightly variable fit-ups without blowing through or creating excessive convexity.

Welders will also appreciate the low spatter levels associated with this wire when used with the recommended high-Argon shielding gas blends. Unlike flux-cored wires that leave a heavy slag covering, the Fabcor 86R leaves only small silicon islands that often pop off on their own or are easily brushed away. This "slag-less" characteristic means you can often perform multi-pass welds without inter-pass cleaning, saving you significant time and effort. The wire is also formulated to resist moisture pickup, ensuring that your hydrogen levels remain low to prevent cracking in sensitive applications.

Why Welders Prefer Fabcor 86R:

• Smooth Operation: Stable arc transfer reduces operator fatigue.
• Forgiving: Handles mill scale and rust better than solid ER70S-6 wire.
• High Speed: Allows for rapid travel speeds without sacrificing bead quality.
• Clean Finish: Produces aesthetically pleasing welds with minimal cleanup required.