S249419-002 - Hobart Fabcor 86R 1/16" Metal-Cored Welding Wire, 60lb Coil

Hobart Fabcor 86R: The Metal Core Solution for Dirty Steel

If you are welding heavy structural steel or fabricating parts that aren't perfectly prepped, the Hobart Fabcor 86R 1/16" metal-cored wire is your go-to solution. Unlike standard solid wires that require pristine surfaces, the Fabcor 86R is loaded with deoxidizers that fight through mill scale and rust, giving you a sound weld without the headache of porosity. It bridges the gap between the ease of MIG and the penetration of flux-core, offering a high-performance alternative for serious fabrication jobs.

This wire runs on DCEP polarity and loves a rich Argon mix (75% to 95% Argon with CO2 balance). When you strike an arc, you'll notice the difference immediately: a spray-like transfer that is smooth, stable, and virtually spatter-free. Because it is a metal-cored wire, the current travels through the outer sheath, creating a wider cone of heat that wets out the toes of the weld beautifully. This means less grinding and less time fixing cold lap. The 1/16" diameter allows you to lay down a lot of metal fast, making it perfect for heavy fillets and groove welds on thick plate.

The 60 lb coil package is designed for shop environments where you want to keep the arc on longer. It fits standard coil adapters and feeds reliably through your system. Whether you are building railcars, ships, or heavy earth-moving equipment, the Fabcor 86R gives you the speed of a solid wire with the forgiveness of a flux wire. It is an excellent choice for robotic cells or handheld applications where travel speed and weld quality are paramount.

Why Welders Choose Fabcor 86R

• Fast Travel Speeds: Get the job done quicker with high deposition rates.
• Clean Welds: Very little slag to chip and almost no spatter to scrape.
• Forgiving Arc: Handles fit-up gaps and surface contaminants better than solid wire.