Skip to Main Content
Canadian
Canadian owned and operated

Hobart Fabshield XLR-8 .072 Self-Shielded Flux Core Wire 20lb Spool

$22.36/lb $279.60/20lb spool only $13.98/lbSave 37%

Usually ships within 3-5 business days

OVERVIEW

Hobart Fabshield XLR-8: The Outdoor Welding Beast

Take your structural welding to the next level with the Hobart Fabshield XLR-8 .072" flux-cored wire. If you are tired of hauling gas cylinders to remote job sites or fighting the wind on top of a beam, this is the wire you've been waiting for. This 20lb spool (S225724-082) is packed with Hobart's advanced self-shielded technology, meaning you get X-ray quality welds without the need for a shielding gas bottle. It’s built for the real world—construction sites, bridge repairs, and heavy equipment fabrication where conditions are rarely perfect.

What makes the XLR-8 a favorite among professional welders is how it handles. We know that vertical-up welding can be a pain with the wrong consumable, but this wire is designed specifically to make vertical welds easier and faster. It features a fast-freezing slag that holds the puddle in place, letting you run hotter and faster than you could with other wires. This means you get the job done quicker with less fatigue. Plus, when you're done with the pass, the slag practically falls off on its own. Less chipping and grinding means you move on to the next joint sooner.

Safety and code compliance are huge on big jobs, and this wire checks all the boxes. It is seismic rated (AWS D1.8), meaning it's tough enough to withstand the stresses of earthquakes and heavy loads. It delivers high impact strength even in freezing temperatures, so you can trust your welds to hold up in the harshest winters. The 20lb vacuum-sealed package ensures the wire stays fresh and dry until you crack it open, preventing porosity and hydrogen issues.

Whether you are welding on a barge, erecting a skyscraper, or fixing heavy machinery in the field, the Hobart Fabshield XLR-8 gives you the freedom of a gasless process with the performance of a shop-quality wire. It runs on DCEN polarity and feeds smoothly through standard flux-core guns. Upgrade your outdoor welding game with the wire that works as hard as you do.

Additional Information
Brand:Hobart
Diameter:0.072 in
Weld Process:Flux-Cored (FCAW)
Position:All Position
Polarity:DCEN
Packaging Description:20lb-spool
AWS Classification:E71T-8JD H8
Shielding Gas:None (Self-Shielded)
Tensile Strength:81,000 psi (Typical)
Yield Strength:66,000 psi (Typical)
Impact Strength:40 ft-lbs at -20°F
Alloy Type:Carbon Steel
Seismic Certification:AWS D1.8

INCLUDED

  • (1) 20 lb. Vacuum Packed Spool of Fabshield XLR-8 .072" Flux-Cored Wire

APPLICATIONS

  • Structural Steel Erection
  • Bridge Construction and Repair
  • Shipbuilding and Barge Fabrication
  • Offshore Rigs and Platforms
  • Heavy Equipment Repair
  • General Construction (Outdoor)
  • Seismic Structural Applications

FAQ

No, this is a self-shielded flux-cored wire (FCAW-S) and does not require external shielding gas.

Hobart Fabshield XLR-8 runs on DCEN (Direct Current Electrode Negative).

It is classified as AWS E71T-8JD H8.

Yes, it meets the requirements of the AWS D1.8 Seismic Supplement.

This spool contains .072-inch diameter wire.

It refers to a 20-pound Vacuum Packed Spool, which protects the wire from moisture.

Yes, Fabshield XLR-8 is designed for all-position welding and excels in vertical-up applications due to its fast-freezing slag.

It should be stored in a dry, controlled environment. The vacuum packaging protects it until use, but once opened, it should be used or stored in a rod oven/dry box if not consumed immediately to maintain low hydrogen status.

CATALOGUE & SPEC SHEETS

Spec Sheet
Safety Data Sheet