Canadian owned and operated.
Take your cutting capabilities to the X-TREME with the Miller Spectrum 375, the most portable and versatile plasma cutter in its class. Whether you are working in the shop, on a construction site, or tackling a project at home, this 19-pound powerhouse is designed to go wherever the work is. Don't let its small size fool you; the Spectrum 375 packs a punch with 30 amps of cutting power, slicing through 3/8-inch mild steel with precision and ease.
Forget the hassle of rewiring your machine or hunting for the right outlet. With Miller's Auto-Line technology and MVP (Multi-Voltage Plug) adapters, you can plug into standard 120V or 240V power sources instantly. The machine automatically detects the voltage and adjusts accordingly, giving you the freedom to work in virtually any location. The included MVP plugs screw on and off in seconds—no tools required—so you're always ready to cut.
Cutting shouldn't be a workout. The Spectrum 375 features the XT30 hand-held torch, meticulously designed with an ergonomic handle, thumb guide, and finger contours to fit naturally in your hand. The ultra-flexible torch cable makes maneuvering around complex workpieces a breeze. Plus, with the innovative Auto-Refire technology, cutting through grate, chain link, or expanded metal is seamless. The pilot arc switches in and out automatically, so you don't have to constantly re-trigger the torch, saving your hand from fatigue and speeding up your workflow.
Your tools need to survive the real world. The Spectrum 375 is protected by a heavy-duty X-CASE that holds the machine, cords, and consumables securely during transport. Inside, Miller's Wind Tunnel Technology keeps dirt and dust away from sensitive electrical components, while the Fan-On-Demand system keeps the unit cool without sucking in excess debris. Whether you're an HVAC pro, a metal artist, or a fabricator, the Spectrum 375 X-TREME is the reliable cutting partner you need.
| Additional Information |
|---|
| Brand:Miller |
| Weld Process:Plasma Cutting |
| Voltage:120/240 V |
| Cutting Capacity:3/8" |
| Duty Cycle:35%, 40%, 60% |
| Amperage:30 |
| Input Phase:1-Phase |
| Input Hz:50/60 Hz |
| Weight:19 lb |
| Torch Model:XT30 |
| Torch Cable Length:12 ft |
| Gas Type:Air, Nitrogen |
| Sever Capacity:5/8 in |
| Generator Requirement:7000 Watts |
| Warranty:3 Years |
| Item:Plasma Cutter |
| Input Voltage:120/240 V |
| Packaging Description:1 per each |
Used this product on the job? Tell other welders how it held up.
Enjoying the 375 X-Treme
This was my first plasma cutter though I have had Miller welders for years. I have only used it a few times but works great so far. I don't work with material over 1/2" very often so this should handle all my needs. Easy to setup and easy to use and the torch is very ergonomic.
Great Product!
Great product! I purchased this product from Airgas Store in Buda, Texas. The guy working has no clue about welders or anything about any equipment. I already did some research about the product, but had a few more questions. He was no help and customer service was terrible. Miller sales great products, I just wish distributors knew something about what they are selling, especially when everything cost lots of $$$$.
Tough little machine
Cuts 1/4 inch steel like butter
So far so good
Great machine. Seems to be able to cut much more than advertised.
Broke the first time I used it!
Broke the first time I used it. In the repair shop
Miller responded
Merchant Response Dear Robert, Thank you for reaching out and sharing your feedback. I want you to know that I will be passing your comments on to the Spectrum Team. Don’t hesitate to contact us for any reason at 920-734-9821 or email directly [email protected]. Sincerely, Cindy, Customer Team.
ABSOLUTE JUNK
Really liked the portability and dual voltage versatility Bought this thing with mad money from a work bonus. Played with it for a couple days then very little time out of the case for awhile. Drug it out and used it on 110 volt to cut some light gauge pannels. Didn't get it cut because it started to smoke then quit. Took it to the local Miller repair and was told the 1300$ mother board was fried and it made more Sense to buy a new one This machine was plugged in for less than 3 hours and in use for less than one The used hypertherm that has replaced it has 10 times the use and it is still working
Miller responded
Merchant Response Dear DVM, Thank you for reaching out and sharing your feedback. I want you to know that I will be passing your comments on to the Plasma Team, with a high-priority notice. Don’t hesitate to contact us for any reason, 920-734-9821 or [email protected]. Sincerely, Cindy, Customer Team.
Go with the best
I had two Chinese plasma cutters and they both quit. Was sold by the 50 amps and the obvious cost difference. No support from one and the others had no us presences so I was out a lot of money. Decided to go with miller because I had their mig and it is a solid work horse. After a couple of weeks of cutting I can tell you there is a reason to go miller. My dad used to say it only cost a little more to go with the best.
I should have purchased this year's ago
Great tool on the farm.
Another good miller product
Great as all miller stuff ive gotten
Excellent machine.
I debated on spending money on a plasma cutter as I was unsure how much I'd really use it. After three weeks of using my new 375 I'm happy I purchased it. Quick setup, easy to use and has enough power for projects in garage and around the acreage. The 375 has same excellent build quality as my other Miller machines.
$300 Rebate
$300 Rebate
